Brought to you in part by:
Thirteen Years!

...

Nineteen Years!
.

Click here to see a list of our Supporters.
  • If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below.

Announcement

Collapse
No announcement yet.

Oil Filter

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • Everett Hill
    started a topic Oil Filter

    Oil Filter

    what oil filter you use on your 2012 2013 5.0 mustang?

  • 65ASCoupe
    replied
    Oil Filter

    Everett,

    Looks like it would work but there are some differences,


    Motorcraft Number FL500s
    Part Number: 57502
    Principal Application: Mazda Tribute, Ford Escape and Mercury Mariner (2009) w/ 3.0L engine - Ford Taurus, Edge, Mercury Sable w/ V6 3.5L mfg after 1/16/2009
    Style: Spin-On Lube Filter
    Service: Lube
    Type: Full Flow
    Media: Paper
    Height: 4.09
    Outer Diameter Top: 2.942
    Outer Diameter Bottom: Closed
    Thread Size: 22X1.5 MM
    By-Pass Valve Setting-PSI: 8
    Anti-Drain Back Valve: Yes
    Max Flow Rate: 10-12 GPM
    Beta Ratio
    Burst Pressure
    Normal Micron Rating
    Gasket Diameters

    OD 2.753
    ID 2.397
    THK 0.25

    Motorcraft Number FL820s
    Part Number: 51372
    Principal Application: Ford/Lincoln/Mercury (91-09), Mazda (00-09), Cadillac STS-V, XLR-V (06-09)
    Style: Spin-On Lube Filter
    Service: Lube
    Type: Full Flow
    Media: Paper
    Height: 4.167
    Outer Diameter Top: 3.66
    Outer Diameter Bottom: Closed
    Thread Size: 22X1.5 MM
    By-Pass Valve Setting-PSI: 16
    Anti-Drain Back Valve: Yes
    Max Flow Rate: 11-13 GPM
    Beta Ratio 2/20=12/25
    Burst Pressure 275
    Normal Micron Rating 19
    Gasket Diameters

    This is from some older info but the filter info still applies.

    I use the 820S on my 2010 Shelby and I use the FL500S on my Daughters 2013 Mustang V6.

    I hope this helps,

    Leave a comment:


  • Everett Hill
    replied
    filter

    my ford parts man said to use a fl820s i know it fits a 5.4 & 4.6 but not sure about a 5.0. I have been using a fl500

    Leave a comment:


  • submariner mustanger
    replied
    Ford has really downsized their filter choices for newer GAS vehicles (2010-present). FL 910 and FL500 are about the only 2 we use.

    Your Mustang AND v6 Mustang both use FL500s.

    Leave a comment:

Working...
X